|
|
 top
|
 |
 How many channels (digitally) can the d.2 accommodate when I have the optional FireWire card installed? |
| The d.2 with the FireWire card installed can accommodate 2 stereo inputs and 1 stereo output (taken right before the Main Mix fader).
top |
|
| How can I adjust my crossfader tension? |
| The tension of the Infinium cross fader is easily adjustable with a small flathead screwdriver. First slide the crossfader all the way to left, then carefully pull straight up on the fader cap to remove it. Once the cap is off, you’ll notice a small screw is now aligned with the hole in the chassis. Using a flathead screwdriver, adjust the tension of the fader by turning clockwise to tighten, and counter-clockwise to loosen. Once the fader is at the desired tension, put the cap back on.
top |
|
| How many total inputs can you get into the d.2? |
| Seven. 2 Phono turntables, 2 CD players, 2 stereo inputs (via FireWire option), and 1 microphone.
top |
|
| Can I use external effects processors with my d.2? |
| Yes the d.2 comes fully equipped with a FX Send and Return so that you can use outboard effects to get your swerve on.
top |
|
| What is that Live/Record switch on the back for? |
| The Live/Record switch selects whether the signal being sent out the RCA Main Outs is pre-fader or post-fader. In a live situation, you can use the pre-fader (Record) mode to send a signal to an external recording device, giving you a mix that is not affected by changes to the Main Mix level.
top |
|
| Why does the d.2 have a Mic/Line? switch on the back?? |
| The d.2 comes equipped with its own built in D.I. box. There is no more need for clunky D.I. boxes when playing on stages or venues that do not normally cater to DJ’s. Use the Line position to connect to line level devices like a power amplifier. The Mic position can be used to connect to the Mic inputs of a mixer.
top |
|
| Can I use a condenser microphone with my d.2? |
| Yes! The d.2 comes fully equipped with 48V phantom power on the microphone input.
top |
