Mixers Loudspeakers Studio Monitors Digital Recording Amplifiers & Processors Software Accessories
Compact  |  Small Format Live  |  Mid Format Live
Satellite

PRODUCT SPOTLIGHT

Round out your Satellite with this Mackie product:


HR824

8


 

Onyx Satellite Specifications

Frequency Response
  Mic Input to Main Output (Gain @ Unity)
  @48 kHz, 20 Hz to 20 kHz, ±1 dB
  @96 kHz, 20 Hz to 40 kHz, ±1 dB
Distortion (THD & IMD)
  Mic Input to Main Output (@ +4 dBu)
THD+N: < 0.02%, 20 Hz to 20 kHz BW, 1 kHz input @ +4 dBu, preamp at unity gain
Dynamic Range (A-weighted, typical)
  103 dB (Mic In to Line Out)
Noise
Signal-to-Noise (A-weighted, typical): >103 dB (ref. +0 dBu, Mic In to Line Out, Gain @ unity)
Equivalent Input Noise (E.I.N.), 20 Hz to 20 kHz Bandwidth, 150Ω source impedance, typical: –110 dBu @ +60 dB gain
Common Mode Rejection Ratio (CMRR)
Mic In: >40 dB @ 1 kHz, Gain @ maximum, typical
Crosstalk
Mic Input to Line Output: < –80 dB @ 1 kHz, +10 dBu signal on adjacent input, 150Ω source impedance
Input Gain Control Range
Mic In: 0 dB to +60 dB, ±1 dB
Line In: –20 dB to + 40 dB, ±1 dB
Phantom Power
  +48 VDC (±20%)
Rated Output
Line: +4 dBu nominal
Maximum Rated Output: +18 dBu @ Balanced Line-Level Outputs
Input Impedance
Mic Input: 2.4 kΩ balanced
Inst Input: 1 MΩ
Line: 20 kΩ balanced, 10 kΩ unbalanced
Output Impedance
Line: 100 Ω balanced
Signal Level LEDs
  –40 dB, –20 dB, –10 dB (normal operating level), OL = 0 dB FS
Sample Frequency Selections
  44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Analog Input Connectors
Pod: Two balanced XLR/TRS combination mic/line inputs
Base Station: Two balanced XLR mic inputs
Four balanced 1/4" TRS line inputs
Two 1/4" TS high-impedance instrument inputs
Analog Output Connectors
Pod: Two balanced 1/4" TRS line-level outputs
Base Station: Eight balanced 1/4" TRS line-level outputs
Analog Insert Connectors
Base Station: Two unbalanced 1/4" TRS line-level inputs/outputs
Digital Input/Output Connectors
Pod: One 6-pin FireWire input/output
Base Station: One 6-pin FireWire input/output
Power Requirements
  Both units can be powered by the 6-pin FireWire connection or by the DC Power Supply included.
In the U.S.: 120 VAC/60 Hz In
12V DC Out
Outside the U.S.: 100 VAC-240 VAC/50-60 Hz In
12V DC Out
Physical Dimensions and Weight:
  Pod
Height: 2.1 in/53 mm
Width: 8.0 in/203 mm
Depth: 4.1 in/104 mm (including front knobs and rear jacks)
Weight: 1.8 lb/0.8 kg
  Base Station
Height: 4.4 in/112 mm (4.6 in/117 mm with feet)
Width: 10.8 in/274 mm
Depth: 6.1 lb/2.8 kg
Weight: 48.0 lb / 21.8 kg

 

Press | Register a product | Dealer Locator | Forums | Jobs | Corporate Info | Legal  | Comment?

Alvarez | Ampeg | EAW | Mackie
Copyright © LOUD Technologies Inc. All Rights Reserved.