|
| FUSSION 3000 Specifications |
| System Acoustic |
| Freq. Range (-10dB): |
45Hz - 20kHz |
| Freq. Response (-3dB): |
55Hz - 18kHz |
| Horz. Coverage Angle (-6dB): |
80° averaged
2kHz to 10kHz |
| Vert. Coverage Angle (-6dB): |
70° averaged
2kHz to 10kHz |
| Directivity Factor; DI(Q): |
10.19 (10.46) averaged
2kHz to 10kHz |
| Rated Maximum SPL (long term): |
130dB @ 1m |
| Rated Maximum SPL (peak): |
133dB @ 1m |
| Rated Maximum SPL-High Pass On: |
85Hz-18kHz: 132dB (long term) |
| Rated Maximum SPL-High Pass On: |
85Hz-18kHz: 135dB (peak) |
| Crossover Points: |
500Hz, 2,500Hz |
| Dynamic Range: |
>110dB |
| Phase Response: |
±35° from 500Hz to 10kHz |
Transducers |
| Low-Frequency: (4
each) |
| Cone Diameter |
12" (300mm) |
| Voice Coil Diameter |
3" (75mm) |
| Power Handling |
350 watts rms (long term)* |
|
| Mid-Frequency: |
| Cone Diameter |
8" (200mm) diameter |
| Voice coil diameter: |
2" (50mm) |
| Power Handling |
150 watts rms (long term)* |
|
| High Frequency: |
| Diaphragm diameter |
3" (152mm) |
| Throat Exit diameter: |
1.4" (35.6mm) |
| Power handling: |
75 watts rms (long term)* |
| Diaphragm Material: |
Titanium |
| *Footnote: Power handling
for transducers is based on AES long term power testing standard conducted
for 100 hours full power, free air. |
| Amplifiers |
| Low-Frequency: |
| Rated Output per AES standard @ low
frequency driver impedance: |
1000 watts Continuous Average Power
1500 watts peak |
| Type: |
Class G High-Efficiency, High Current |
| Cooling: |
Convection Extrusion |
|
| Mid-frequency: |
| Rated Output per AES standard @mid
frequency driver impedance: |
200 watts Continuous Average Power
300 watts peak |
| Type: |
Mosfet-Based Class AB |
| Cooling: |
Convection Extrusion |
|
| High-frequency: |
| Rated Output per AES standard @ high
frequency driver impedance: |
100 watts Continuous Average Power
150 watts peak |
| Type: |
Mosfet-Based Class AB |
| Cooling: |
Convection Extrusion |
| Audio Input / Output / Controls |
| Main Input, Loop Out: |
50k Ohm impedance, balanced |
| Sub-Out Signal: |
85Hz low pass output with protection and active
monitoring for FUSSION 1800S/1800SA active subwoofer system |
| Fill Out Signal: |
85Hz high-pass signal |
| Fill Out Signal Level Control: |
0 dB to -30 dB |
| Fill Out Phase Control: |
0°-180° |
| High-Pass Switch: |
Allows system to operate from 85Hz up only |
| Line Input Power |
| US |
120V, 60Hz |
| Recommended amperage service: |
20 amps |
| AC Connector: |
3 pin Twistlock 250VAC, 20A male |
| Europe |
230V, 50Hz |
| Recommended amperage service: |
16 amps |
| AC Connector: |
3 pin IEC 250VAC, 16A male |
| Current Protection: |
Yes, transistor based |
| Control System Functions |
| Electronic Crossover |
| Phase Alignment |
| Time Correction |
| Equalization |
| Safety Features |
| RMS limiting: |
Monitoring and limiting of continuous RMS output
of amplifiers |
| Thermal: |
Monitoring of thermal condition of power supply and amplifiers.
High temperature condition engages input stage shut down and auto
reset function. |
| Physical |
| Enclosure: |
Trapezoidal, 15° side angles, 18mm multi-
layered birch |
| Hanging Inserts: |
4 points on top |
| Rigging Inserts: |
2 points, 1 each side ATM MEGS
1 pull back clip, bottom |
| Handles: |
4 ea. aluminum/rubber grips |
| Color: |
Black, splatter paint |
| Grille: |
Custom perforated oval steel grille with anti corrosive treatment |
|
| Dimensions |
| Height |
41.89 in (1064mm) |
| Front Width |
24.72 in (628mm) |
| Rear Width |
13.86 in (352mm) |
| Depth |
22.64 in (575mm) |
| Net Weight: |
246 lbs. (112 kg) |
| Options |
| Active Subwoofer System: |
Fussion 1800SA / 1800S |
| Flyware: |
ATM Megs Compatible |
Since we're always striving to make our stuff better by incorporating new and improved materials, components and manufacturing methods, we reserve the right to change these specifications at any time without notice.
|
