Frequency Response
Mic Input to any Output (Trim at 0 dB):
	+0, -1 dB 20 Hz to 20 kHz
Line/CD Input to any Output:
	±0.5 dB 20 Hz to 20 kHz
Phono Input to any Output:
	±1 dB of RIAA EQ curve

Distortion (THD & IMD)
THD @ Main Output, 20 Hz to 20 kHz
	Mic Input @ 30 dB Gain: Less than 0.0075% Line/CD Input @ 0 dB Gain: Less than 0.0075% Phono Input: Less than 0.01%
THD @ Phones Output, 20 Hz to 20 kHz
	Line Input @ 0 dB Gain: Less than 0.03% 10mV rms input, gain at –1 dB FS output
SMPTE IMD @ +4 dBu Output
	Mic Input @ 30 dB Gain: Less than 0.008% Line/CD Input @ 0 dB Gain: Less than 0.008%

Common Mode Rejection Ratio (CMRR)
Mic Input (Gain = maximum):
	Greater than 60 dB @ 1 kHz

Crosstalk
Adjacent Inputs or Input to Main Output:
	Less than –85 dB @ 1 kHz

Noise Characteristics
Equivalent Input Noise (E.I.N.) (20 Hz to 20 kHz)
	Mic Input (150 Ω source impedance): Less than –123 dBu Phono Input (500 Ω/500 mH source impedance): Less than 0.3 μV CD/Line Input (150 Ω source impedance): Less than –110 dBu Dynamic Range (Main Out): Greater than 100 dB

Maximum Input Levels (rated at 1% THD)
	Mic Input (Gain @ minimum): +9 dBu CD and Line Inputs (PGM Gain = 0 dB): +22 dBu FX Input: +22 dBu Phono Input: 78 mV @ 1kHz

Input/Output Characteristics:
Input Gain Control Range:
	Mic Input: +13 dB to +63 dB PGM Input: OFF to +13 dB FX Return: OFF to +13 dB

Input Impedance:
	Mic Input: 2.4 kΩ balanced CD/ Line Input: 20 kΩ balanced FX Return: 20 kΩ balanced Phono Input: 47.5 kΩ shunted with 200 pF

Maximum Output Levels:
	XLR Main Output: +22 dBu RCA Main Output: +22 dBu Booth Output: +22 dBu FX Send: +22 dBu Phones: 15 volts rms into 8Ω (28 watts)

Output Impedance:
	Main XLR/RCA Output: 150 Ω Booth Output: 150 Ω FX Send: 150 Ω Phones: 25 Ω

Equalization
Mic Channel
	Low: ±15 dB @ 80 Hz Mid: ±15 dB @ 2.5 kHz High: ±15 dB @ 12 kHz
PGM Channel
	Low: +10/–inf dB @ 300 Hz Mid: +10/–inf dB @ 1 kHz High: +10/–inf dB @ 4 kHz

VU Meters
	12-segment pre-fader PGM meters 12-segment pre-fader Main Mix meters OL (+20), +10, +7, +4, +2, 0, –2, –4, –7, –10, –20, –30 0 LED = +4 dBu Mic Input Signal Present LED (Sensitivity): –20 dBu

AC Power Requirements:
Power Consumption:
	20 watts
Universal AC Power Supply:
	100 VAC – 240 VAC, 50-60 Hz

Physical Dimensions and Weight:
Height:
	15.49"/393.4 mm (including knobs and connectors)
Width:
	10"/254 mm
Depth:
	4.62"/ 117.3 mm (including knobs and connectors)
Weight:
	11 lb/5 kg (with FireWire card)
	The d.2 mounting slots are compatible with the Odyssey Battle Bridge. This consists of two L brackets which bolt to the d.2 and allow you to fi t it securely between two turntable cases. See www.odysseygear.com for more details.

Options
	d.2 FireWire Interface Card