Plug-in Assign

Acuma Labs

Antares

Drawmer

Massenburg

t.c.electronic

IVL

Mackie Mono Delay

Mackie UFX/MFX

Plug-In Downloads

Register Plug-Ins

1. Download the .EXE file Plug-in Service Pack 2 (3.5 MB)
2. To expand the ZIP file, you may need WinZip™ (www.winzip.com) or a similar program installed on your computer. Once downloaded, double-click on the file. This will launch WinZip™.
3. Click on the Extract button. The default "Extract To" directory is normally set to to C:\Windows\Temp. If you prefer to have the files extracted to a different location, type the path into the provided text box and then press the "Extract" button. Once the extraction is completed, quit WinZip™.
4. Locate the three extracted files, labeled PLUG_SP2_1.exe, PLUG_SP2_2.exe, and PLUG_SP2_3.exe in the directory into which the files were extracted.
5. Label one double sided, high-density 1.44MB freshly PC formatted floppy disk as "Disk 1", a second as "Disk 2", and a third as "Disk 3".
6. Double-click on the first file, PLUG_SP2_1.exe, and you will see a "WinImage™ Self-Extractor" dialog box.
7. Be sure that both "Writing on Floppy" and "Formatting" are checked and click on the "OK" button in the upper right corner of the dialog box.
8. When the "Batch Assistant" dialog box appears, insert Disk 1 into drive A:\ and then click the "OK" button. If the disk is not blank, you will get an additional dialog informing you that all data on the disk will be overwritten. Click "YES".
9. When the WinImage™ utility has completed writing to Disk 1, remove Disk 1 and insert Disk 2 and repeat steps 5 through 8 using PLUG_SP2_2.exe instead. Remove Disk 2 when the operation is complete. When the WinImage™ utility has completed writing to Disk 2, remove Disk 2 and insert Disk 3 and repeat steps 5 through 8 using PLUG_SP2_3.exe instead. Rebooting your PC with the disk in can create problems with your PC.
10. With the D8B powered off, insert installation Disk 1 into the D8B's floppy drive, and power up the D8B.
11. The D8B will boot into the installer program automatically. Follow the prompts on the LCD screen.
12. Insert Disk 2 into the floppy drive when prompted, and select "Continue".
13. Insert Disk 3 into the floppy drive when prompted, and select "Continue".
14. When the D8B has completed reading all three installer disks, it will ask you if you want to install Plug-in Service Pack 2. Press "OK" to finish the installation, or "Cancel" to cancel the installation without writing any files to disk.
15. When the installation is complete, remove Disk 3 from the floppy drive and power cycle the D8B.

Follow these steps if you are downloading onto a Mac OS™ computer:

1. Download the self-extracting file: Plug-in Service Pack 2 (4.7 MB)
2. To expand the HQX file, you need Stuffit Expander™ (http://www.aladdinsys.com/) . If Stuffit Expander does not launch automatically at the completion of the download, then drag the HQX file onto the Stuffit Expander™ icon. Stuffit Expander™ creates a file called Plugin Service Pack2.sea, and a folder titled Plugin Service Pack2. Drag the SEA file to the trash can.
3. Launch Apple's Disk Copy utility (you may need to download the Disk Copy utility from http://www.apple.com. or check the system installations disks that came with your system).
4. Label one double sided, high density 1.44MB freshly PC formatted floppy disk as "Disk 1", a second PC formatted floppy as "Disk 2", and a third PC formatted floppy as "Disk 3".
5. Depending on your version of Disk Copy, either click on the "Load Image File..." button or choose "Make a Floppy" from the Utilities menu.
6. Locate the image folder labeled Plugin Service Pack2 that was extracted onto your hard drive, select the Plugin SP2_D1.img file, and click "Choose".
7. Insert Disk 1 into the floppy drive when prompted. With older versions of Disk Copy you may need to click on the "Make a copy" button first.
8. Disk Copy will eject the floppy when it has finished making the image. Remove Disk 1, and repeat steps 5 through 7, using Plugin SP2_D2.img to create Disk 2.
9. Disk Copy will eject the floppy when it has finished making the image. Remove Disk 2, and repeat steps 5 through 7, using Plugin SP2_D3.img to create Disk 3.
10. With the D8B powered off, insert installation Disk 1 into the D8B floppy drive, and power up the D8B.
11. The D8B will boot into the installer program automatically. Follow the prompts on the LCD screen.
12. Insert Disk 2 into the floppy drive when prompted, and select "Continue".
13. Insert Disk 3 into the floppy drive when prompted, and select "Continue".
14. When the D8B has completed reading all three installer disks, it will ask you if you want to install Plug-in Service Pack 2. Press "OK" to finish the installation, or "Cancel" to cancel the installation without writing any files to disk.
15. When the installation is complete, remove Disk 3 from the floppy drive and power cycle the D8B.

Note to Macintosh USB Floppy drive users:
Apple's Disk Copy program will not work using the above method with a USB floppy drive because the menu option "Make a Floppy..." will not be available. You must use Aladdin Systems' ShrinkWrap program available for purchase and trial download from Aladdinsys. Once you have ShrinkWrap installed substitute these steps for steps 3-9 in the above directions.

3.		Launch ShrinkWrap.
4.		Label one double sided, high density 1.44MB freshly PC formatted floppy disk as "Disk 1", a second PC formatted floppy as "Disk 2", and a third PC formatted floppy as "Disk 3".
5.		Select "Write Image back to Disk..." from the Image menu (command-B).
6.		Locate the image folder labeled Plugin Service Pack2 that was extracted onto your hard drive, select the Plugin SP2_D1.img file, and click "Select".
7.		Insert Disk 1 into the floppy drive when prompted.
8.		ShrinkWrap will eject the floppy when it has finished making the image. Remove Disk 1, and repeat steps 5 through 7, using Plugin SP2_D2 to create Disk 2, and again using Plugin SP2_D3.img to create Disk 3.