Mixers Loudspeakers Studio Monitors Digital Recording Amplifiers & Processors Software Accessories
Compact Mixers   |  Recording Interfaces   |  Control Surfaces
400F

TRANSLATE


PRODUCT SPOTLIGHT

Round out your 400F with this Mackie product:


HR626

Dual 6 High Resolution Studio Monitor


ARTIST SPOTLIGHT

Justin Meldal-Johnsen (Beck, Air, Imarobot) in the Studio with the Onyx 800R


     

Onyx 400F Specifications

Frequency Response
Mic Input to Line Output (Gain @ unity):
@48 kHz
+0, –3 dB, 10 Hz to 24 kHz
@96 kHz
+0, –3 dB, 10 Hz to 48 kHz
@192 kHz
+0, –3 dB, 10 Hz to 96 kHz
Mic Input to Digital Output (S/PDIF, 192 kHz sample rate):
+0, –3 dB, 10 Hz to 96 kHz

Distortion (THD & IMD)
Mic Input to Line Output (@ +4 dBu output):
THD+N: < 0.003%, 20 Hz to 20 kHz BW
1 kHz input @ +4 dBu, preamp at unity gain
Mic Input to Digital Output (S/PDIF, 48 kHz sample rate):
THD+N: < 0.001%, 20 Hz to 20 kHz BW
10mV rms input, gain at –1 dB FS output

Phantom Power
+48 VDC

Rated Output
Line:
+4 dBu
Maximum Rated Output:
+24 dBu @ Balanced Line-Level Outputs

Input Impedance
Mic Input:
2.4 kΩ balanced
Inst Input:
1 MΩ
Line:
20 kΩ balanced, 10 kΩ unbalanced

Output Impedance
Line:
100 Ω balanced

Signal Level LEDs
–40 dB, –20 dB, –10 dB (normal operating level), OL = 22 dBu

Sample Frequency Selections
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

Analog Input Connectors
Four balanced XLR/TRS mic/line inputs
Four balanced 1/4" TRS line inputs
Two 1/4" TS high-impedance instrument inputs

Analog Output Connectors
Eight balanced 1/4" TRS line-level outputs

Digital Input Connectors
One BNC connector for external word clock input
One RCA connector for S/PDIF input
One 5-pin DIN for MIDI input
Two 6-pin FireWire input/output

Dynamic Range
>107 dB (Mic In to Line Out)

Noise
Signal-to-Noise:
>87 dB (ref. +4 dBu, Mic In to Line Out, Gain @ unity)
Equivalent Input Noise (E.I.N.), 20 Hz to 20 kHz Bandwidth, 150Ω source impedance:
–129 dBu @ +60 dB gain

Common Mode Rejection Ratio (CMRR)
Mic In:
>60 dB @ 1 kHz, Gain @ maximum

Crosstalk
Mic Input to Line Output:
< –100 dB @ 1 kHz, +10 dBu signal on adjacent input, 150Ω source impedance

Input Gain Control Range
Mic In:
0 dB to +60 dB
Line In:
–20 dB to + 40 dB

Digital Output Connectors
One BNC connector for external word clock output
One RCA connector for S/PDIF output
One 5-pin DIN for MIDI output

DSP
TMS320C6713 Floating-Point Digital Signal Processor operating at 225 MHz, delivering up to 1350 million floating-point operations per second (MFLOPS), 1800 million instructions per second (MIPS), and 450 million multiply-accumulate operations per second (MMACS)

AC Power Requirements
Power Consumption:
20 watts
Universal AC Power Supply:
100 VAC – 240 VAC, 50-60 Hz

Physical Dimensions and Weight
Height:
1.75 in/44 mm
Width:
17.50 in/445 mm (main body of unit)
19.00 in/483 mm (with rack ears)
Depth:
7.63 in/194 mm (including front knobs and rear BNC jack)
Weight:
5.6 lb/2.5 kg

 


 

Press | Register a product | Dealer Locator | Forums | Jobs | Corporate Info | Legal  | Comment?

Alvarez | Ampeg | EAW | Mackie
Copyright © LOUD Technologies Inc. All Rights Reserved.