| 1 |
Internal (inside) 20GB+ hard drive |
15 |
Track
selects track options like Mute and Virtual Take number settings |
| 2 |
Pullout drive bay for Mackie Media™ hard disk trays |
16 |
Project saves and loads project info |
| 3 |
Meter bridge |
17 |
Backup transfers projects between internal HD and Mackie Media |
| 4 |
Record Ready buttons for each channel |
18 |
Disk Util works with Backup and also formats drives and tests their
compatibility with the recorder |
| 5 |
3.5-inch floppy drive for importing tempo maps and software upgrades |
19 |
System - the "none-of-the-above" catch-all button |
| 6 |
Locate buttons for creating loops and jumping to pre-set points |
20 |
Digi I/O configures I/O cards |
| 7 |
Store Locate/Loop points |
21 |
Sync selects sync flavor (SMPTE, MIDI, black burst, mocha mint, etc.) |
| 8 |
Loop button |
22 |
24x4 LCD display shows operating information, prompts and selects
options via paging buttons |
| 9 |
Record Safe disarms all tracks and disables the Record button |
23 |
Page left and right buttons changes display subject |
| 10 |
All Input causes all tracks to monitor their inputs |
24 |
Select buttons correspond to options on the screen directly above
them |
| 11 |
Auto Input buttons
When off, all armed tracks monitor their inputs; when on, all armed
tracks monitor their input except in Play mode where they monitor
track playback |
25 |
Dec and Inc (up and down) buttons scroll through parameter values |
| 12 |
Auto Take automatically selects next virtual recording track |
26 |
Indicators for Sample Rate, Bit Depth, Time Code and Sample Clock
status |
| 13 |
T-Code Chase causes the HDR to lock to either SMPTE or MTC |
27 |
LED display shows hr:min:sec:fr or bars:beats:ticks |
| 14 |
Delete Last erases the last record pass from the disk |
28 |
Good ole fashioned transport controls just like the kind Mom used
to make |
