| |
ADX100™
Frequency Conscious Gating, Limiting, and Expansion, Compression
Acknowledged
as master of the analogue dynamics processor, Drawmer now brings
its expertise in noise gates, expanders and compressor/limiters
to the Mackie Digital 8•Bus.
Main Features
- Left and
Right input levels. -15.75dB to +16dB in 0.25dB increments.
- Input VU
meters. -42dB to 0dB.
- Faders for
quick parameter control. All thresholds and levels are in linear
dBs, but other controls are scaled to a user friendly law which
minimizes 'fine tuning' and allows a wide range of operation.
- Mem A and
Mem B Presets. You can instantly recall two preferred settings.
- Noise Gate.
Operates like an audio switch, and is particularly suited to percussive
signals, where it can shape the envelope to create a crisp, well
defined signal.
- Triggering.
Click on to toggle selection of trigger sources. In Stereo mode,
the gate can trigger from either the Left or Right channels, a
mono signal generated Left + Right or MIDI.
- Envelope
Controls. Control the speed at which the Gate opens and closes.
- Gate/Duck
switch. When Duck is selected, the operation is reversed, so that
when the signal is above threshold, the output is attenuated.
Below Threshold, the signal passes un-attenuated.
The ADX100 provides
either a Noise
Gate or an Expander.
Use the Noise Gate to shape the envelopes of percussive signals,
such as drums. For vocals or other expressive signals, the Expander
may be better suited to the task, since it can track the signal
levels instead of simply switching on and off.
|
Specifications:
Key Filters:
- Low:
15.6 Hz > 22.6 kHz
- Hi:
15.6Hz > 22.6 kHz
Noise
Gate:
- Attack:
0.02mS > 1.1 S
- Hold:
5.0mS > 4.74S
- Decay:
5mS > 5S
- Range:
0dB > -144dB
|
Expander:
- Threshold:
-63.5dB > 0dB
- Ratio:
1:1 > 1:123
- Attack:
0.00mS > 100mS
- Release:
20mS > 997mS
- Range:
0dB > 63dB
Compressor:
- Threshold:
-63.5dB > 0dB
- Ratio:
1:1 > 20:1
- Attack:
0.1mS > 100mS
- Release:
33mS > 3.66S
- Gain:
-16dB > +15.75dB
|
| |
|
|
